09'-18' Ram 1500 CRM

Publication3.jpg
cooltextRAM80-1.png
RenderedImage (54).png
RenderedImage (55).png
RenderedImage (57).png
RenderedImage (56).png

We've learned over the years that customers want specific solutions to meet their particular need and looks. We've designed, installed and tested several custom solutions around the country that customers asked for. Accomplishing this task requires replacement of the factory coils to make room for air springs. Most kits support 4x2 & 4x4 models and are 100% bolt-in.

With numerous suspension kits on the market, we realize there are several unique challenges & questions based on your level of modification. The kits offered for sale at the bottom of this page have been tried, tested and true.  Options not offered are in prototyping or testing phases. Please "CONTACT US" for guidance.

Our design philosophy is to build them tough with quality components that perform without fail and stand behind every product 100%. Please view our "GENERAL INFO" page for detailed information.

RenderedImage (48).png

This kit is for factory unaltered suspensions. It will maintain the original rake and provide full benefit of rear axle adjustable air suspension. 

RenderedImage (49).png

This kit is for factory unaltered suspensions. It will level the the rear with the front and provide full benefit of rear axle adjustable air suspension.  Travel limiting chains are provided in this kit.

RenderedImage (46).png

This kit is for those who have installed a lowering kit. Typically 2" drop spindles on the front axle and 4" drop coils in the rear with panhard bar relocation mount, shorter sway bar links and bump stops. Travel limiting chains are provided in this kit.

RenderedImage (47).png

This kit is for those who have installed a lowering kit. Typically drop spindles on the front axle and shorter drop coils in the rear with panhard bar relocation mount, shorter sway bar links and bump stops. This option requires extensive cutting of axle parts to accomodate a 6" drop. Travel limiting chains are provided in this kit.

RenderedImage (50).png

This kit is for those who have installed a 4" BDS, Zone or Fabtech lift. Provides full benefit of rear axle adjustable air suspension. This kit is in testing phase at this time.

We are looking for test trucks with Superlift, Rough Country or ProComp lifts. Please "Contact Us" if you are interested.

 

RenderedImage (51).png

This kit is for those who have installed a 6" BDS, Zone or Fabtech lift. Provides full benefit of rear axle adjustable air suspension. This kit is in testing phase at this time. 

We are looking for test trucks with Superlift, Rough Country or ProComp lifts. Please "Contact Us" if you are interested.

Some have asked why we use chain instead of nylon straps for limiting travel. The answer is longevity. We provide kits every across North America through all temperature extremes. One season in snow, salt and chemical will cause nylon straps fray, rot and fail in short order. We use a galvanized chain wrapped with an industrial woven black sleeve. All mounting hardware is provided. Kits are now shipped with 7.25 diameter 6,000 LBS (per pair) air springs.

All kits are supplied with two (Standard) compression manual air fill lines. Air springs require individual pressure. Factory coils have different compression rates for right & left. The left (Drivers Side) coil has a higher rate than the right side due primarily to driver and fuel level weight compensation. Replacement with non-factory coils or air springs will cause the truck to be unlevel side to side.  We've seen this issue with only 200 lbs off center on 1500 through 3500's. We have several "AMS" Air Management Solutions available to fit your needs. 

RenderedImage (44).png
09'-18' RAM 1500 6" Lowering CRM (SQ8893669)
544.00

This kit will fit a 6” lowered suspension. This kit will replace aftermarket coils provided by lowering kit manufactures. This kit includes Mounts, 6,000+ lbs combined Air Springs, Fasteners, Push-to-Connect Fittings, Two air lines with brass barbed Air Valves and Axle Limiting Chains. If a TGE Air Management System is ordered with this kit, individual air lines will be omitted.

Quantity:
Add To Cart
09'-18' Ram 1500 4" Lowering CRM (SQ5087674)
544.00

This kit is for those with a 4" lowering kit already installed. Travel limiting chains & dual (Standard) compression manual air fill lines are included with this kit if no air system is purchased. We highly recommend a fully automatic air system to control this kit.

Quantity:
Add To Cart
09'-18' Ram 1500 (Factory Level) CRM (SQ1798430)
544.00

This kit is for those who want to level the rear to the front without installing a lowering kit. Travel limiting chains & dual (Standard) compression manual air fill lines are included in the kit if no air system is purchased. Stock shocks & sway bar links can be maintained. We highly recommend a fully automatic air system to control this kit.

Quantity:
Add To Cart
09'-18' RAM 1500 (Factory Rake) CRM (SQ3235059)
504.00

This kit is for those who want to replace coils with air springs and maintain factory rake.  Dual (Standard) compression manual air fill lines are included in the kit if no air system is purchased. We highly recommend a fully automatic air system to control this kit.

Quantity:
Add To Cart